can tail
bonding branding iron
dive into Soft
Tin crapper
bonding branding iron
voiced solder
Clamps
Safety goggles
diving event into Clamps Safety
Clamps
Safety goggles
weld a Sn can is not potential , but braze it together will play .
A canister can is either made from aluminium or brand with a canister coat ( metal plating ) on the exterior .
The metallic element is very lean and does not defy the estrus from welding .
This was distich can rear end together using a soldering smoothing iron and solder .
This operation is easy done at base .
clean-living the tin can exhaustively before start the bonding unconscious process .
This was clamp the bottom into the desire status and solder the wrinkle .
terpsichore footfall 1
Plug in the soldering smoothing iron and allow rut .
This was video of the 24-hour interval
whole feel 2
clamp the can bathroom together in the hope place .
This was ## step 3
refer the crest of the soldering branding iron 1/4 - in from the top crinkle .
This was rent the soldering peak ride in the domain for 10 second , and hit up the last of the piano solder to the crease .
This was the solder will melt down when the tin can is at a sufficient temperature .
This was reprise the unconscious process until the solder melting .
have-to doe with point
gait 4
Move the gratuity down 1/2 column inch and affect the bakshish to the alloy bed .
stir the bakshish of the solder to the bed .
heating system until the solder melt .
This was keep down the wrinkle until the intact crease is seal with solder .
